our products

Pre-Installation

Measure the area and ascertain the amount of materials required.

It is recommended to have 5% more of decking boards to work with to make up for all the possible cutting wastage.

Preparation

It is important to have a solid foundation that will help stabilize the entire decking structure. In order to achieve that, make sure the area is clean of debris, foliage, weeds, water and other undesirable materials that if not removed can impede the deck.

It is advisable to have a level surface with sufficient scope for drainage.

Substructure

Fix the runners 30cm to 40cm apart by screwing into the ground/surface with proper leveling. Do not ever over tighten the screws into the runner. Continue the process at 1 meter spaces along the length of the frame.

For soft grounds, it is advisable to use posts as substructures on concrete pad foundations. For uneven grounds, stabilize the posts by adding concrete mix. After installation, remove the extra height of the post.

Installation

Position the Deck wood firmly on the runners. Make sure to have it aligned properly with the runner.

Insert the angles perfectly into the groove of the Deck wood and screw it into the pre-drilled centre line of the runner.

After leaving a 1/8’’ gap for expansion between the Deck wood and planks, join them perfectly using angles.

Place the second row of boards on the first after leaving another expansion gap. This can be facilitated by using a T-fastener.

Tighten all the screws properly and double check to confirm no parts are loose.

Maintenance tips

Keep your composite deck dry. Standing water overtime can lead to stains.

Ensure the drainage is proper to eliminate water from under the deck. Remove all debris and dirt out of gaps.

Ensure adequate ventilation is maintained under and between the boards to prevent mold growth. Clean your deck at least twice each year.